blog
How to use Athena Products
How to use Athena Products
Athena Cuts Rooting Gel
Athena Cuts Rooting Gel is a premium rooting gel formulated to propagate new plants from stem and leaf cuttings of mother plants. It is formulated with an essential plant hormone that promotes rapid root generation and growth.
This water-based gel coats and seals the tissue around the cut stem. This contains a blend of hormones, nutrients, and vitamins that are easily absorbed by the plant to promote abundant root cell development.
Athena Cuts may be used on any type of cutting, including woody, herbaceous, flowers, ornamentals, vegetables, and fruit trees.
APPLICATION INSTRUCTIONS
Squeeze a small amount of Athena Cuts Rooting Gel into a separate container.
Take cuttings from healthy mother plants and trim to 2-8 inch length.
Make cuts at a 45-degree angle on the stem.
Dip the cut end of the stem into Athena Cuts gel to the desired depth or immerse in water until ready to be dipped.
After Athena Cuts gel has been applied, place cuttings into a cloning system or rooting medium.
Depending on the variety, roots may appear within a few days or weeks of dipping. Transplant clones once the cuttings have rooted.
BEST PRACTICES
Take cuttings only from new growth on healthy mother plants.
Do not dip cuttings directly into container.
Discard used gel, do not reuse.
Athena Cleanse
Athena Cleanse is made from hypochlorous acid. This mild acid is derived from salt and a proprietary electrochemical treatment process. The result is a unique chemical with powerful oxidative properties which can be used to reduce mineral scale in irrigation systems.
Key Features
Non-toxic and non-nutritive - Safe to use on plants in and stage of growth
Works to descale irrigation systems and decompose residual organic matter
Effective as a final flush to remove mineral buildup (scale) in growing media and irrigation lines
Very low TDS - Doesn't throw off mineral balance
Keeps irrigation system cleaner and running efficiently longer
How To Use
System Maintenance:
Irrigation systems that are regularly maintained with Athena Cleanse treatment will last longer and run more optimally throughout. This is because Cleanse helps break down mineral scale and other buildup that has been lodged in the system.
Regular Use:
Use a dilute mixture of 2-5 mL per gallon water for regular maintenance.
Severe Conditions:
Increase rate to 5-10 mL per gallon water for combatting severe reservoir and growing media conditions.
RDWC and Other Recirculating Hydroponics Systems:
Any recirculating or deep water culture (DWC) irrigation system should use Athena Cleanse remove mineral residue and reduce scale.
Using Cleanse in a recirculating or DWC system helps break down materials with lower solubility ratings, such as mineral complexes that are no longer available to plants. Mineral buildup and lockout are major causes of nutrient deficiencies - solve these issues with Athena Cleanse.
Using Cleanse in a recirculating or DWC system helps break down materials with lower solubility ratings, such as mineral complexes that are no longer available to plants. Mineral buildup and lockout is a major cause of deficiencies and plant health problems-solve these issues with Athena Cleanse.
Media/System Flush Mix:
Use Athena Cleanse at a rate of 5-10 mL/ gallon of water during the final flush stage to help reduce residual mineral buildup.
The mild acid used in Athena Cleanse does not impact plant growth or development, and as such, the product can be used to descale irrigation systems during all growth stages.
Athena CaMg
Athena CaMg is designed to supplement either of our 2-part liquid formulas. Some cultivars and growing conditions may require higher doses of Calcium, Magnesium, Iron and Nitrogen during heavy growth and development phases. This product effectively corrects these common deficiencies without throwing off overall elemental balance. In systems using reverse osmosis (RO) water and plants grown in inert media, such as coco and rockwool, Athena CaMg is particularly useful. Although our 2-part formulas already provide sufficient levels of Calcium and Magnesium, some growers require find supplementation helpful in demanding conditions.
Application Rates
Add 2.5 mL per gallon of water during all stages as needed.
See Feed Schedules for specific application recommendations.
How To Use:
Best Practices
Shake well before use.
Use clean measuring instruments--do not put anything into the bottle.
Some applications may require different dosages.
Recommended for hydroponic use, especially with inert media and when using reverse osmosis (RO) water.
Monitor EC regularly and adjust accordingly based on crop and growth stage.
Adjust to pH to proper levels after mixing all fertilizers and additives.
Store closed in original packaging at a temperature between 45° F and 85° F.
Athena PK
Athena PK is a balanced bloom boosting complement to our Bloom fertilizers. This clean liquid booster is designed to supplement during the mid- to late-flowering phase. Athena PK is a low Nitrogen booster that provides additional Phosphorus and Potassium that high-yielding plants require for maximal production. Many PK boosters add far too much of these elements and create a cascade of problems, such as reducing Calcium and Magnesium availability. Balanced elemental bioavailability is essential in the flowering phase to boost essential oil and terpene production.
Application Rates:
Add 3-10 mL per gallon of water during the flowering phase starting in week 3.
See Feed Schedules for specific application recommendations.
How To Use:
Best Practices
Shake well before use.
Use clean measuring instruments--do not put anything into the bottle.
Monitor EC regularly and adjust accordingly based on the crop and growth stage.
Adjust pH to proper levels after mixing all fertilizers and additives.
Store closed in original packaging at a temperature between 45° F and 85° F.
Athena Grow is a simple and clean formula designed for the vegetative stage of growth and for non-flowering plants. Our careful balanced mineral ratios help facilitate optimal plant development including photosynthesis, healthy respiration, and robust stalk and root growth.
This 2-part blended liquid formula should be used in equal amounts during the veg phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.
Formulas are sediment free and are compatible with all dosing and irrigation systems in including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.
Application Rates
Add 2-5 mL of Grow A per gallon of water during the vegetative growth phase.
See Feed Schedules for specific application recommendations.
How To Use:
Best Practices
Shake well before use.
Use clean measuring instruments--do not put anything into the bottle.
Always use equal parts of Athena Grow A & B to maintain proper mineral ratios.
Monitor EC regularly and adjust accordingly based on crop and growth stage.
Adjust to pH to proper levels after mixing all fertilizers and additives.
Do not combine in undiluted form.
Store closed in original packaging at a temperature between 45° F and 85° F
BLOOM A & BLOOM B
Athena Bloom is a simple and clean 2-part formula designed for the flowering stage of growth for fruit and flower-producing plants. We blend top of the line macronutrients and chelated micronutrients to achieve greater nutrient uptake ability across a wider pH range in any combination of grow method, water-type and media.
This 2-part blended liquid formula should be used in equal amounts during the flowering phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.
Formulas are sediment free and are compatible with all dosing and irrigation systems including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.
Application Rates
Add 2-7 mL of Athena Bloom A per gallon of water during the flowering phase.
See Feed Schedules for specific application recommendations.
How To Use:
Best Practices
Shake well before use.
Use clean measuring instruments--do not put anything into the bottle.
Always use equal parts of Athena Bloom A & B to maintain proper mineral ratios.
Monitor EC regularly and adjust accordingly based on crop and growth stage.
Adjust pH to proper levels after mixing all fertilizers and additives.
Do not combine in undiluted form.
Store closed in original packaging at a temperature between 45° F and 85° F.
Stack
Stack is a natural plant nutrient made from kelp extract. The nutrients in Stack encourage healthy growth and flowering. Stack gives the plant tools to reach its full genetic potential. When used as a foliar or root drench, Stack helps correct minor potassium deficiencies.
Instructions for use:
May be used as a foliar spray or root drench, one application weekly. Safe for use in irrigation systems. Stack contains organic ingredients and may separate in storage. Shake well before use.
Application Timing:
Apply Stack from the final week of vegetative growth to week 4-5 of flowering, or once plants stop growing vertically.
Root Drench:
Mix 1-2ml per gallon of water in a weekly mix. May be mixed with regular fertilizer recipe. Add last to reservoir.
Foliar Spray:
Mix 7ml per gallon water and spray thoroughly once weekly. Spray with lights off and allow to dry before turning on. Do not spray past week 3 flower.
Transplant Use:
Mix 2ml per gallon water and bare root soak for 30-60 seconds prior to transplanting or water in solution after transplanting. Stack may reduce transplant stress and improves plant vigor.
Seed Treatment:
Mix 4ml per gallon water and soak seed for 1-2 minutes before planting. Stack may increase germination rates and plant vigor.
Athena Balance
Athena Balance is a simple formula of potassium silicate specifically concentrated to buffer irrigation water and stabilize to ideal pH. Silicon additionally benefits plant growth, stem structure, stress reduction, water usage (osmoregulation), and nutrient utilization.
Commercial growers find better results, particularly with reverse osmosis (RO) water, when buffering first with Athena Balance. Pure RO water has unstable chemical structure that can trap other nutrients when added without a buffer. Athena Balance adds just enough to the water to create a more homogenous fertilizer solution and reduce the need to pH adjust after mixing.
Formula is sediment-free and is compatible with mechanical dosing systems (Dosatron). Athena Balance is not recommended for electronic dosing systems (Netafim).
Athena IPM
Athena IPM is a complete pest management formula that kills many soft-bodied insects and mildew on contact. When used as directed Athena IPM penetrates plant crevices and leaf surfaces where unwanted biotic diseases seek to colonize.
Instructions for use:
Complete powdery mildew management: Control, Killer & Cure
NO artificial pesticides or fungicides
Derived from inputs grown in the USA
Can be used from seedling to harvest
EPA 25(b) Exempt product with minimal risk ingredients
State pesticide active registration status
Approved for use in these states:
AK, AZ, AR, CA, CO, CT, DE, FL, GA, HI, IL, KS, KY, MA, MD, MI, MN, MO, NC, ND, NH, NJ, NV, NY, OH, OK, OR, PA, RI, TN, TX, UT, VT, WI, WV
Athena Pro Core
Athena Pro Core provides strong baseline nutrition across all stages of plant growth. Nitrogen to assemble chlorophyll and amino acids. Calcium to build structure. Essential microelements to catalyze photosynthesis, enzyme production and a multitude of important plant processes.
Instructions for use:
Readily available Nitrogen, Calcium, and essential microelements
Fully soluble dry fertilizer, no particulates or sediment
Works with any dosing system: Dosatron, Netaflex, Rhythm
Mixes completely at room temperature
Low heavy metal content
Ideal for mixing stock tanks and compatible with all dosing systems. This large-grind mix is 100% soluble and will not clog irrigation systems or leave sediment in reservoirs.
We discourage mixing Pro Line in small amounts directly into the reservoir. We would rather turn the Pro line into a concentrated liquid first and then use that liquid to mix your batch tanks.
Nutrient Preparation Steps for a STOCK CONCENTRATE:
Get a measuring container that has accurate gallon marks on it.
Fill half of the stock tank with water.
Slowly pour granules into water while agitating, then mix thoroughly to solubilize.
Add additional water until it gets exactly to the 12.5 gallon mark.
Vigorously mix until all granules are solubilized.
Mix your BATCH RESERVOIR:
Using the recommended 2 lb per gallon chart determine the ml per gallon to achieve your desired EC.
Ingredients
Calcium Nitrate, Iron EDTA, Manganese EDTA, Copper EDTA, Zinc EDTA, Boric Acid, Sodium Molybdate
Athena Pro Grow
The vegetative growth stage demands well-rounded nutrition to establish strong roots and lush foliage. Athena Pro Grow is a balanced soluble fertilizer blend formulated for commercial cultivators to streamline irrigation. Use with Athena Pro Core for a complete and balanced recipe.
Instructions for use:
Balanced NPK and essential microelements (when used with Pro Core)
Fully soluble dry fertilizer, no particulates or sediment
Works with any dosing system: Dosatron, Netaflex, Rhythm
Mixes completely at room temperature
Low heavy metal content
Ideal for mixing stock tanks and compatible with all dosing systems. This large-grind mix is 100% soluble and will not clog irrigation systems or leave sediment in reservoirs.
We discourage mixing Pro Line in small amounts directly into the reservoir. We would rather turn the Pro line into a concentrated liquid first and then use that liquid to mix your batch tanks.
Nutrient Preparation Steps for a STOCK CONCENTRATE:
Get a measuring container that has accurate gallon marks on it.
Fill half of the stock tank with water.
Slowly pour granules into water while agitating, then mix thoroughly to solubilize.
Add additional water until it gets exactly to the 12.5 gallon mark.
Vigorously mix until all granules are solubilized.
Mix your BATCH RESERVOIR:
Using the recommended 2 lb per gallon chart determine the ml per gallon to achieve your desired EC.
Ingredients
Potassium Phosphate, Potassium Nitrate, Potassium Sulfate, Magnesium Sulfate, Iron DTPA
Athena Pro Core Three Part Nutrient Bundle - Grow, CORE & Bloom
Flowering plants require higher amounts of phosphorous (P) and potassium (K) to increase flower bulk and support high-metabolic activities. Athena Pro Bloom contributes balanced levels macro and micro-elements including sulfur (S) used for increasing potency and flavors.
Instructions for use:
Balanced NPK and essential microelements (when used with Pro Core)
Fully soluble dry fertilizer, no particulates or sediment
Works with any dosing system: Dosatron, Netaflex, Rhythm
Mixes completely at room temperature
Low heavy metal content
Ideal for mixing stock tanks and compatible with all dosing systems. This large-grind mix is 100% soluble and will not clog irrigation systems or leave sediment in reservoirs.
We discourage mixing Pro Line in small amounts directly into the reservoir. We would rather turn the Pro line into a concentrated liquid first and then use that liquid to mix your batch tanks.
Nutrient Preparation Steps for a STOCK CONCENTRATE:
Get a measuring container that has accurate gallon marks on it.
Fill half of the stock tank with water.
Slowly pour granules into water while agitating, then mix thoroughly to solubilize.
Add additional water until it gets exactly to the 12.5 gallon mark.
Vigorously mix until all granules are solubilized.
Mix your BATCH RESERVOIR:
Using the recommended 2 lb per gallon chart determine the ml per gallon to achieve your desired EC.
Ingredients
Potassium Phosphate, Potassium Sulfate, Magnesium Sulfate, Iron DTPA
Athena Pro BALANCE
Warning: This product is corrosive to most metals. Do not expose powder or liquid to aluminum. Keep away from low pH products and store in a well-ventilated area. Always wear proper PPE when handling, including respirator, eye protection and skin coverings.
Athena Pro Balance is a powered water-soluble pH up for the professional cultivator design specifically for use with advanced fertigation systems like Dosatron and Netaflex. Athena Pro Balance allows the grower to customize the strength of their pH adjustment to their unique situation. Pro Balance concentrate may be mixed at a rate of 0.25 – 1 lb. per gallon. Adjust the mix rate and injection rate depending on the amount of pH adjustment required.
APPLICATION INSTRUCTIONS
Always wear protective gear when handling. Mix as a concentrate at 0.25 - 1 lb. per gallon (40 - 120 grams per liter) in clean water. Dose as needed to raise fertilizer solution to target pH. Calibrate your pH meter before measuring for best accuracy. Mixing Pro Balance causes a thermal reaction that heats the solution while mixing. Allow time to fully mix and cool before using concentrate.
See Pro Balance SOP for further details and instructions.